# 访问Proxmox官网下载页面
# https://www.proxmox.com/en/downloads

# 下载Proxmox VE 8.3 ISO
# 点击 “Proxmox VE 8.3 ISO Installer”
# 选择镜像站点下载

# 文件名: proxmox-backup-server_3.3-1.iso
# 文件大小: 约 1.2GB

# Linux命令行下载
# cd /fgedudb/proxmox
# wget https://enterprise.proxmox.com/iso/proxmox-ve_8.3-1.iso

# 下载输出案例如下：
–2026-04-05 04:00:15– https://enterprise.proxmox.com/iso/proxmox-ve_8.3-1.iso
Resolving enterprise.proxmox.com… 52.84.125.19
Connecting to enterprise.proxmox.com|52.84.125.19|:443… connected.
HTTP request sent, awaiting response… 200 OK
Length: 1288490188 (1.2G) [application/octet-stream]
Saving to: ‘proxmox-ve_8.3-1.iso’

proxmox-ve_8.3-1.iso 100%[===============================================>] 1.20GB 25.6MB/s in 48s

2026-04-05 04:01:03 URL:https://enterprise.proxmox.com/iso/proxmox-ve_8.3-1.iso [1288490188/1288490188] -> “proxmox-ve_8.3-1.iso” [1]

# 验证下载文件
# ls -lh proxmox-ve_8.3-1.iso
-rw-r–r– 1 root root 1.2G Apr 5 04:01 proxmox-ve_8.3-1.iso

# 验证SHA256校验和
# sha256sum proxmox-ve_8.3-1.iso
a1b2c3d4e5f6g7h8i9j0k1l2m3n4o5p6q7r8s9t0u1v2w3x4y5z6a7b8c9d0e1f2 proxmox-ve_8.3-1.iso

方式二：国内镜像下载

# 使用清华大学镜像
# wget https://mirrors.tuna.tsinghua.edu.cn/proxmox/iso/proxmox-ve_8.3-1.iso

# 使用中科大镜像
# wget https://mirrors.ustc.edu.cn/proxmox/iso/proxmox-ve_8.3-1.iso

# 下载输出案例如下：
–2026-04-05 04:05:30– https://mirrors.tuna.tsinghua.edu.cn/proxmox/iso/proxmox-ve_8.3-1.iso
Resolving mirrors.tuna.tsinghua.edu.cn… 101.6.15.130
Connecting to mirrors.tuna.tsinghua.edu.cn|101.6.15.130|:443… connected.
HTTP request sent, awaiting response… 200 OK
Length: 1288490188 (1.2G) [application/octet-stream]
Saving to: ‘proxmox-ve_8.3-1.iso’

proxmox-ve_8.3-1.iso 100%[===============================================>] 1.20GB 56.8MB/s in 22s

2026-04-05 04:05:52 URL:https://mirrors.tuna.tsinghua.edu.cn/proxmox/iso/proxmox-ve_8.3-1.iso [1288490188/1288490188] -> “proxmox-ve_8.3-1.iso” [1]

# 将ISO文件刻录到U盘或光盘

# Linux使用dd命令写入U盘
# dd if=proxmox-ve_8.3-1.iso of=/dev/sdb bs=4M status=progress && sync

# 输出案例如下：
1288490188 bytes (1.3 GB, 1.2 GiB) copied, 45 s, 28.6 MB/s
307+1 records in
307+1 records out
1288490188 bytes (1.3 GB, 1.2 GiB) copied, 45.1234 s, 28.5 MB/s

步骤2：安装Proxmox VE

# 启动服务器，选择从U盘启动

# 安装向导步骤：
步骤1：Proxmox VE安装界面 – 选择 “Install Proxmox VE” – 按Enter
步骤2：最终用户许可协议 – 点击 “I agree”
步骤3：目标硬盘 – 选择目标磁盘
– 文件系统：ext4（或zfs）
– 点击 “Next”
步骤4：位置和时区
– 国家：China
– 时区：Asia/Shanghai
– 键盘布局：U.S. English
– 点击 “Next”
步骤5：管理员密码
– 密码：fgedu_proxmox_password_2026
– 确认密码：fgedu_proxmox_password_2026
– 邮箱：admin@fgedu.net.cn
– 点击 “Next”
步骤6：网络配置
– 管理接口：eth0
– IP地址：192.168.1.54/24
– 网关：192.168.1.1
– DNS服务器：192.168.1.1
– 主机名：pve01.fgedu.net.cn
– 点击 “Next”
步骤7：确认安装
– 查看配置摘要
– 点击 “Install”

# 输出案例如下：
Installing Proxmox VE…
Installation complete.
Please remove the installation medium and reboot.

# 重启后访问Web界面
# https://192.168.1.54:8006

# 登录
# 用户名：root
# 密码：fgedu_proxmox_password_2026
# 领域：Linux PAM standard authentication

# 配置国内镜像源
# 登录Web界面或SSH

# 编辑软件源配置
# vi /etc/apt/sources.list.d/pve-enterprise.list
# 注释企业源
# deb https://enterprise.proxmox.com/debian/pve bookworm pve-enterprise

# 添加社区源
# vi /etc/apt/sources.list.d/pve-no-subscription.list
deb http://mirrors.tuna.tsinghua.edu.cn/proxmox/debian/pve bookworm pve-no-subscription

# 更新软件包
# apt update
# apt dist-upgrade -y

# 输出案例如下：
Hit:1 http://mirrors.tuna.tsinghua.edu.cn/proxmox/debian/pve bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Reading package lists… Done
Reading package lists… Done
Building dependency tree… Done
Calculating upgrade… Done
The following packages will be upgraded:
pve-manager proxmox-ve
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 15.6 MB of archives.
After this operation, 1,024 B of additional disk space will be used.